Advertisement
TECSUN
R A D I O S A U S T R A L I A
Battery Power
with new.
3
connection. It requires a 3V DC Power Source. Ensure that the
polarity is correct.
4
clicks. Adjust the volume to the desired listening level.
until it clicks.
FM Reception
AM Reception
DX/Local Selector
the DX position.For local radio station,set it to the
stereo earphones socket.
through earphones can damage your hearing.
POWER REQUIREMENTS
This radio is designed to operate on 2 LR6 Energizer type
batteries(AA or equivalent).Remove the Battery Compartment
cover and fit the batteries in the battery compartment following
the diagram on the back of the radio.
If the sound becomes low or distorted, replace all batteries
External Power
A DC Input Socket has been provided for external power
USING THE RADIO
Swith on the radio by turning the volume control until it
To switch off the radio, turn the volume control knob down
For FM reception,fully extend the telescopic antenna,and
press the FM button. The FM indicator will light. Select the
desired radio station by turning the Tuning Knob.When a strong
signal is found,the tuning indicator will light.
For MW/SW reception press the MW/SW button. The MW/
SW indicator will light. Select the desired band with the Band
selector. Select the desired radio station by turning the Tuning
Knob.When a strong signal is found,the tuning indicator will light.
For the best FM or SW reception extend the Telescopic
Antenna. The MW band uses a built in directional aerial. Rotate
the radio for the best reception.
To select a distant radio signal,set the DX/LOCAL switch to
For private listening, this radio is equipped with a 3.5mm
Please remember that excessively loud sounds played
EARPHONES
www.tecsunradios.com.au
position.
LOCAL
Advertisement
