Standard Features And Accessories; Indoor Units; Outdoor Units - Bryant 619PB Product Data

STANDARD FEATURES AND ACCESSORIES

Ease Of Installation
Mounting Brackets
Low Voltage Controls
Comfort Features
Microprocessor Controls
Wired Remote Control
Wireless Remote Control
Automatic Horizontal Air Sweep
Air Direction Control
Auto Restart Function
Cold Blow Protection On Heat Pumps
Freeze Protection Mode On Heat Pumps
Turbo Mode
Silence Mode
Auto Changeover On Heat Pumps
Follow Me
Energy Saving Features
Sleep Mode
Stop/Start Timer
46° F Heating Mode (Heating Setback)
Safety And Reliability
3 Minute Time Delay For Compressor
Over Current Protection For Compressor
Indoor Coil Freeze Protection
Indoor Coil High Temp Protection in Heating Mode
Condenser High Temp Protection in Cooling Mode
Ease Of Service And Maintenance
Cleanable Filters
Diagnostics
Liquid Line Pressure Taps
Application Flexibility
Condensate Pumps
Crankcase Heater
Legend
S Standard
A Accessory

INDOOR UNITS

S
S
S
A
S
S
S
S
S
S
S
S
Fig. 1 – Condensate Pump Accessory
S
S
On high wall fan coils, the condensate pump has a lift capability
of 12 ft (3.6 m) on the discharge side with the pump mounted in
S
the fan coil or 6 ft (1.8 m) on the suction side if the pump is
S
remote mounted. The pump is recommended when adequate drain
line pitch cannot be provided, or when the condensate must move
S
up to exit.
S
NOTE: An external 115v power source will be required to run the
S
pump on unit sizes 9k and 12k.
S
S

OUTDOOR UNITS

S
Crankcase Heater
S
Standard on all unit sizes. Heater clamps around compressor oil
S
stump.
S
A
S
4