Bryant 619PB Product Data page 2

LOW SOUND LEVELS
When noise is a concern, the ductless split systems are the answer.
The indoor units are whisper quiet. There are no compressors
indoors, either in the conditioned space or directly over it, and
there is none of the noise usually generated by air being forced
through ductwork.
When sound ordinances and proximity to neighbors demand quiet
operation, the 538P unit is the right choice: The advanced,
horizontal airflow design distributes air more evenly over the coil.
SECURE OPERATION
If security is an issue, outdoor and indoor units are connected only
by refrigerant piping and wiring to prevent intruders from
crawling through ductwork. In addition, since 538P units can be
installed close to an outside wall, coils are protected from vandals
and severe weather.
FAST INSTALLATION
This compact ductless split system is simple to install. A
mounting bracket is standard with the indoor units and only wire
and piping need to be run between indoor and outdoor units.
These units are fast and easy to install ensuring minimal
disruption to customers in the home or workplace. This makes the
619PB/538PR ductless split systems the equipment of choice,
especially in retrofit situations.
SIMPLE SERVICING AND
MAINTENANCE
Removing the top panel on outdoor units provides immediate
access to the control compartment, providing a service technician
access to check unit operation. In addition, the draw- thru design of
the outdoor section means that dirt accumulates on the outside
surface of the coil. Coils can be cleaned quickly from the inside
using a pressure hose and detergent.
On all indoor units, service and maintenance expense is reduced
due to easy- to- use cleanable filters. In addition, these high wall
systems have extensive self- diagnostics to assist in
troubleshooting.
BUILT- IN RELIABILITY
Ductless split system indoor and outdoor units are designed to
provide years of trouble- free operation.
The high wall indoor units include protection against freeze- up
and high evaporator temperatures on heat pumps.
The condensing units on heat pumps are protected by a three
minute time delay before the compressor will start the over- current
protection and the high temperature protection.
INDIVIDUAL ROOM COMFORT
Maximum comfort is provided because each space can be
controlled individually based on usage pattern. The air sweep
feature provided permits optimal room air mixing to eliminate hot
and cold spots for occupant comfort. In addition, year- round
comfort can be provided with heat pumps.
ECONOMICAL OPERATION
The ductless split system design allows individual room heating or
cooling when required. There is no need to run large supply- air
fans or chilled water pumps to handle a few spaces with unique
load patterns. In addition, because air is moved only in the space
required, no energy is wasted moving air through ducts.
EASY- TO- USE CONTROLS
The high- wall units have microprocessor- based controls to
provide the ultimate in comfort and efficiency. The user friendly
wireless remote control provides the interface between user and
the unit.
ACCESSORIES
Customizing these ductless split systems to your application is
easily accomplished.
Adding a condensate pump accessory to the high wall fan coil
provides installation flexibility.
OPTIONAL WIRED CONTROLLER
AGENCY LISTINGS
All systems are listed with AHRI (Air Conditioning, Heating &
Refrigeration Institute), and ETL.
2