Table of Contents
Advertisement
C
The Auto Off Function
No operations
25m 0s
25m 0s
880
880
• The time that elapses before the camera enters standby mode is about one minute. The time can
be changed using the Auto off setting in the setup menu (A78).
• While the camera is in standby mode, the monitor turns back on if you perform any of the
following operations or open the monitor:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
Flashes
performed
Camera enters
standby mode.
No operations
performed
3 min
Camera turns off.
21
Advertisement
Table of Contents
