Table of Contents
Advertisement
Problem
No indicators displayed in
monitor.
Print date not available.
Date not imprinted on
images even when Print
date is enabled.
Screen for setting time zone
and date is displayed when
camera is turned on.
Camera settings reset.
Monitor turns off, and the
power-on lamp flashes
quickly.
Camera becomes hot.
Camera makes sound.
Cause/Solution
Hide info is selected for Photo info in Monitor
settings in the setup menu.
Time zone and date has not been set in the setup
menu.
• The current shooting mode does not support Print
date.
• The date cannot be imprinted on movies.
The clock battery is exhausted; all settings were
restored to their default values.
The battery temperature is high. Turn off the camera
and allow the battery to cool down before resuming
use. After the lamp flashes for three minutes, the
camera turns off automatically. Pressing the power
switch also turns off the camera.
The camera may become hot when used for an
extended period of time to shoot movies or send
images using an Eye-Fi card, or when used in a hot
environment; this is not a malfunction.
When Autofocus mode is set to Full-time AF or
while in some shooting modes, the camera may
produce an audible focusing sound.
A
78, E73
16, 78,
E71
78, E75
16, 18
–
–
58, 75
F9
Advertisement
Table of Contents
