Transportation And Storage; Maintenance; Installing Battery Pack; Holding The Chain Saw - Ryobi RCS36X3550HI Original Instructions Manual

1. Clear surface around the oil cap to prevent
contamination.
2.
3.
filling.
4.
any spillage.
5.
40 min.
Recommended chain lubricating oil
The manufacturer recommends you use only Ryobi

INSTALLING BATTERY PACK

See page 13.
1.
battery port.
2.
secure in the chain saw before beginning operation.

HOLDING THE CHAIN SAW

See page 13.
Always hold the chain saw with your right hand at the rear
handle and your left hand at the front handle. Grip both
Ensure that your left hand is holding the front handle so
that your thumb is underneath.
STARTING THE CHAIN SAW
See page 13.
1. Before starting for operation, you should install the
hand guard toward the front handle.
2.
press the throttle trigger.
CHECKING AND OPERATING CHAIN BRAKE
1.
while the chain is rotating rapidly. Be sure to maintain
both hands on the saw handles at all times.
2.
and pulling toward the front handle until you hear a
WARNING
for repair prior to use.

TRANSPORTATION AND STORAGE

See page 25, 26.
the tool to cool before storing or transporting.
Clean all foreign material from the product. Store it in
to children. Keep away from corrosive agents such
outdoors.
Fit guide bar cover before storing the unit, or during
transportation.
For transportation, secure the machine against
movement or falling to prevent injury to persons or
damage to the machine.

MAINTENANCE

WARNING
Use only original manufacturer's replacement parts,
accessories and attachments. Failure to do so can
cause possible injury, poor performance and may void
your warranty.
WARNING
technician. For service we suggest you return the
product to your nearest authorized service center for
repair. When servicing, use only identical replacement
parts.
WARNING
Remove the battery before adjustment, maintenance or
cleaning. Failure to do so could result in serious personal
injury.
in this manual. For other repairs, contact the authorized
service agent.
correctly, thus increasing the potential for serious
injury. Keep your chainsaw professionally maintained
and safe.
the manufacturer strongly recommends that a worn or
dull chain is replaced with a new one, available from
your authorised Ryobi service centre. The part number
is available in the product specification table in this
manual.
Follow instructions for lubricating and chain tension
After each use, clean the product with a soft dry cloth.
condition. Any part that is damaged should be properly
7