Table of Contents
Advertisement
springing back to the upright position during the bucking
cut to separate the log from the stump. Watch out for
springpoles—they are dangerous. Do not attempt to cut
bent branches or stumps that are under tension unless you
are professionally trained and competent to do so.
WARNING! Springpoles are dangerous and could
strike the operator, causing the operator to lose control of
the chainsaw. This could result in a severe or fatal injury
to the operator. Cutting spring poles should be done by
trained users.
TRANSPORTATION AND STORAGE
■
Turn off the product, remove the battery pack, and allow
the product to cool down before storing or transporting.
■
Remove all foreign materials from the product. Store
the product in a cool, dry, and well-ventilated place that
is inaccessible to children. Keep the product away from
corrosive agents, such as garden chemicals and de-
icing salts. Do not store the product outdoors.
■
Fit the guide bar cover before storing the product or
during transportation.
■
For
transportation,
secure
movement or falling to prevent injury to persons or
damage to the product.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.
MAINTENANCE
■
Use only original manufacturer's replacement parts,
accessories, and attachments. Failure to do so
can cause possible injury, can contribute to poor
performance, and may void your warranty.
■
Servicing requires extreme care and knowledge
and should be performed only by a qualified service
technician. Have the product serviced by an authorised
service centre only.
■
You may make adjustments or repairs described in this
manual. For other repairs, have the product serviced by
an authorised service centre only.
■
■
■
■
■
Maintenance schedule
Daily check
Bar lubrication
Chain tension
Chain sharpness
For damaged parts
For loose fasteners
Chain brake function
Inspect and clean
the
product
against
Bar
Complete saw
Chain brake
WHAT'S IN THE BOX
See page 10.
■
■
■
NOTE: The chain and bar oil, battery pack, and charger
are sold separately.
SAFETY DEVICES
Chain brake
Chain brakes are designed to quickly stop the chain from
rotating. When the chain brake lever/hand guard is pushed
towards the bar, the chain should stop immediately. A
chain brake does not prevent kickback. It only lowers the
risk of injury should the chain bar contact the operator's
body during a kickback event. The chain brake should be
tested before each use for correct operation in both the run
and brake positions.
immediately, or if the chain brake does not stay in the
Consequences of improper maintenance, removal, or
modification of safety devices may cause the product
to not function correctly, increasing the potential
for serious injury. Keep the product professionally
maintained.
Sharpening the chain safely is a skilled task. Therefore,
the manufacturer strongly recommends that a worn or
dull chain is replaced with a new one, available at your
authorised service centre. The part number is available
in the product specification table in this manual.
Follow the instructions for lubricating and chain tension
checking and adjustment.
After each use, clean plastic parts with a soft, dry cloth.
Check all nuts, bolts, and screws at frequent intervals
for security to ensure that the product is in safe working
condition. Any part that is damaged should be properly
repaired or replaced by an authorised service centre.
Before each use
Before each use and
frequently
Before each use
(visual check)
Before each use
Before each use
Before each use
Before each use
After each use
Every 5 hours of operation
Chainsaw x 1
Guide bar cover x 1
Operator's manual x 1
WARNING! If the chain brake does not stop the chain
7
Advertisement
Table of Contents
