Work Area Safety; Electrical Safety; Personal Safety; Power Tool Use And Care - Ryobi RCS36X3550HI Original Instructions Manual

WARNING
When using the product, the safety rules must be
followed. For your own safety and that of bystanders, you
must read and fully understand these instructions before
operating the product. You should attend a professionally
organized safety course in the use, preventative actions,
these instructions safe for later use.
WARNING
Chainsaws are potentially dangerous tools. Accidents
involving the use of chainsaws often result in loss of limbs
or death. It is not just the chainsaw that is the hazard.
Diseased or rotting timber poses additional hazards.
safely. If there is any doubt, leave it to a professional
tree surgeon.

GENERAL SAFETY WARNINGS

WARNING
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
Save all warnings and instructions for future reference.
The term "power tool'' in the warnings refers to your

WORK AREA SAFETY

Keep work area clean and well lit.
areas invite accidents.
Do not operate power
atmospheres, such as in the presence of flammable
liquids, gases or dust.
which may ignite the dust or fumes.
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.

ELECTRICAL SAFETY

Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
Do not expose power tools to rain or wet conditions.
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.

PERSONAL SAFETY

tools in explosive

POWER TOOL USE AND CARE

Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
Use personal protective equipment. Always wear
eye protection.
protection used for appropriate conditions will reduce
personal injuries.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
Remove any adjusting key or wrench before turning
the power tool on.
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories or storing
power tools. Such preventive safety measures reduce
Store idle power tools out of the reach of children
1