Preface; This Manual - Siemens 670 V2 Operating Instructions Manual

Preface

1.1

This manual

Purpose of the Manual
This manual provides you with information derived from the requirements for manuals in
conformity with mechanical engineering documentation according to DIN 8418. This
information refers to the device, its place of use, transport, storage, installation, usage and
maintenance.
This manual is aimed at the following target groups:
• Users
• Commissioners
• Service technicians
• Maintenance technicians
Please pay particular attention to the chapter "Safety Information and General Information."
Required Basic Knowledge
Thorough knowledge of personal computers and Microsoft operating systems is required.
General knowledge in the field of automation is recommended.
Where is this Manual valid?
This manual is valid for devices with the order numbers 6AV772..., 6AV773..., 6AV774...
and 6AV775....
Changes compared to the previous version 11/02
Start up instructions and device manual are combined in the control unit operating
instructions. The structure of the document was standardized: Heading and numbering of the
main chapter describe the main steps in their processing sequence.
Panel PC 670 V2/870 V2, Control unit
Operating Instructions, Edition 03/2004, CD Documentation and Drivers
1
1-1