The Trust Domain Screen - ZyXEL Communications vmg8924-b10a User Manual

Chapter 31 Remote Management
Table 138 Maintenance > Remote MGMT (continued)
LABEL
Port
Certificate
HTTPS
Certificate
Apply
Cancel

31.3 The Trust Domain Screen

Use this screen to view a list of public IP addresses which are allowed to access the Device through
the services configured in the Maintenance > Remote MGMT screen. Click Maintenance >
Remote MGMT > Turst Domain to open the following screen.
Note: If this list is empty, all public IP addresses can access the Device from the WAN
through the specified services.
Figure 169 Maintenance > Remote MGMT > Trust Domain
The following table describes the fields in this screen.
Table 139 Maintenance > Remote MGMT > Trust Domain
LABEL
Add Trust
Domain
IPv4 Address
Delete
290
DESCRIPTION
You may change the server port number for a service if needed, however you must use the
same port number in order to use that service for remote management.
Select a certificate the HTTPS server (the Device) uses to authenticate itself to the HTTPS
client. You must have certificates already configured in the Certificates screen.
Click Apply to save your changes back to the Device.
Click Cancel to restore your previously saved settings.
DESCRIPTION
Click this to add a trusted host IP address.
This field shows a trusted host IP address.
Click the Delete icon to remove the trust IP address.
VMG8924-B10A User's Guide