Add/Edit Internet Connection - ZyXEL Communications vmg8924-b10a User Manual

5.2.1 Add/Edit Internet Connection

Click Add New WAN Interface in the Broadband screen or the Edit icon next to an existing WAN
interface to configure a WAN connection. The screen varies depending on the interface type, mode,
encapsulation, and IPv6/IPv4 mode you select.
5.2.1.1 Routing Mode
Use Routing mode if your ISP give you one IP address only and you want multiple computers to
share an Internet account.
The following example screen displays when you select the ADSL/VDSL over ATM connection
type, Routing mode, and PPPoE encapsulation. The screen varies when you select other interface
type, encapsulation, and IPv6/IPv4 mode.
Figure 23 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
The following table describes the labels in this screen.
Table 7 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode)
LABEL
General
Active
Name
Type
VMG8924-B10A User's Guide
DESCRIPTION
Select this to activate the WAN configuration settings.
Specify a descriptive name for this connection.
Select whether it is an ADSL/VDSL over PTM, ADSL over ATM connection or Ethernet.
Chapter 5 Broadband
49