Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha F30A Owner's Manual

Operation
3. Hold the rear of the top cowling with one
hand, tilt the engine up, and turn the tilt
support lever toward you or tilt support
knob into the clamp bracket, and then
place the tilt lock lever back into the lock
position to support the outboard motor.
NOTICE: Do not use the tilt support
lever or knob when trailering the
boat. The outboard motor could
shake loose from the tilt support and
fall. If the motor cannot be trailered in
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 56.
EMU32723
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever / gear
shift lever in neutral.
50
ZMU04064
2.
TIP:
Multifunction tiller handle: The alert indicator
[ECM01641]
may faintly light momentarily while using the
power trim and tilt switch. This occurs due to
the noise from power trim and tilt relay oper-
ation and does not indicate a malfunction.
ZMU04065
N
Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
UP
UP
DN
ZMU03196
"
ZMU01935