Using Touchscreen Gestures - HP Z1 G2 User Manual

1. During system boot, press F10 to enter the BIOS setup.
2. Locate and select the Security menu from the available menu selections displayed near the top of the
screen.
3. Select Slot Security.
4. Select Slot 1 mini PCIe / mSATA.
5. Use the arrow keys to change Enabled to Disabled, and then press F10 to accept the change.
6. Select File from the header menus, and then select Save Changes and Exit.
To disable the WLAN in Windows 7, do the following:
1. Change View By from Category to either Large Icon or Small Icon.
2. In Control Panel, go to Device Manager.
3. Expand Network Adapters.
4. Select Intel® Dual Band Wireless-AC 7260.
5. Select Disable.
6. Select Yes.
7. To re-enable, select Enable.
To disable the WLAN in Windows 8 or Windows 10, do the following:
1. Change View By from Category to either Large Icon or Small Icon.
2. In Control Panel, go to Device Manager.
3. Expand Network Adapters.
4. Select Intel® Dual Band Wireless-AC 7260.
5. Go to Driver menu.
6. Select Disable.
7. Select Yes.
8. To re-enable, select Enable.
To remove the wireless modules, see one of the following for information on removal and replacement of
components:
● The Maintenance and Service Guide for your workstation at
workstation_manuals
● Videos for your workstation at

Using touchscreen gestures

A touchscreen workstation allows you to control items on the screen directly with your fingers. To use touch
gestures, you must have a touch model that has Microsoft Windows installed on it.
TIP: On touchscreen workstations, you can perform the gestures on the screen or using the keyboard and
mouse.
NOTE: Not all gestures are supported in all programs. Unless otherwise specified, gestures are supported
in all versions of Windows.
16 Chapter 3 Setting up and using the workstation
http://www.hp.com/go/sml
http://www.hp.com/support/