Using Touchscreen Gestures - HP Z1 G2 User Manual

1. During system boot, press F10 to enter the BIOS setup.
2. Locate and select the Security menu from the available menu selections displayed near the top
of the screen.
3. Select Slot Security.
4. Select Slot 1 mini PCIe / mSATA.
5. Use the arrow keys to change Enabled to Disabled, and then press F10 to accept the change.
6. Select File from the header menus, and then select Save Changes and Exit.
To disable the WLAN in Windows 7, do the following:
1. Change View By from Category to either Large Icon or Small Icon.
2. In Control Panel, go to Device Manager.
3. Expand Network Adapters.
4. Select Intel® Dual Band Wireless-AC 7260.
5. Select Disable.
6. Select Yes.
7. To re-enable, select Enable.
To disable the WLAN in Windows 8, do the following:
1. Change View By from Category to either Large Icon or Small Icon.
2. In Control Panel, go to Device Manager.
3. Expand Network Adapters.
4. Select Intel® Dual Band Wireless-AC 7260.
5. Go to Driver menu.
6. Select Disable.
7. Select Yes.
8. To re-enable, select Enable.
To remove the wireless modules, see one of the following for information on removal and
replacement of components:
Maintenance and Service Guide for your workstation at
The
●
workstation_manuals
Videos for your workstation at
●

Using touchscreen gestures

A touchscreen computer allows you to control items on the screen directly with your fingers. To use
touch gestures, you must have a touch model that has Microsoft Windows installed on it.
TIP: On touchscreen computers, you can perform the gestures on the screen or using the keyboard
and mouse.
NOTE: Not all gestures are supported in all programs. Unless otherwise specified, gestures are
supported in both Windows 7 and Windows 8.
http://www.hp.com/go/sml
http://www.hp.com/support/
Using touchscreen gestures 17