Navigating Using A Saved Route; Adding A Stop To A Saved Route Using The Map - TomTom go Reference Manual

Tip: You can also save a route using the Add to My Routes button in the Current Route
menu.

Navigating using a saved route

To navigate using a previously saved route, do the following:
1. In the Main Menu, select My Routes.
2. Select a route from your list.
The route is shown on the map view.
3. Select the route on the map view.
A pop-up menu shows the name of the route.
4. To navigate to the start of the saved route, select the drive button:
Your navigation device converts the starting point of the saved route to your first stop and
then plans the route. Your device then starts to guide you to your destination from your
current location. As soon as you start driving, the guidance view is shown automatically.
Tip: There are two other ways to navigate using a saved route:
Select the starting point of the route. When the pop-up menu opens, select Change to Stop.
Alternatively, select Drive via Here in the Current Route menu.

Adding a stop to a saved route using the map

Note: You can also press and hold a location on the map and select Add to Current Route from
the pop-up menu.
1. Press the switch view button
Your complete route is shown on the map.
2. Select the route.
to show the map.
64