TomTom go Reference Manual page 23

When your navigation device starts after it was turned off and you have a route planned, you are
shown the map view with your current location.
1. Switch view button. Select the switch view button to change between the map view and the
guidance view.
2. Zoom buttons. Select the zoom buttons to zoom in and out.
Tip: On some devices you can also
3. Instruction panel. This panel shows the following information:
The direction of your next turn.

The distance to your next turn.

The name of the next road on your route.

Lane guidance

4. Route symbols. Symbols are used on your route to show your starting location, your stops,
and your destination.
5. Main Menu button. Select the button to show the
6. Speed panel. This panel shows the following information:
The speed limit at your location.

Your current speed. If you drive more than 5 km/h or 3 mph over the speed limit the speed

panel turns red. If you drive less than 5 km/h or 3 mph over the speed limit the speed pan-
el turns orange.
The name of the street you are driving on.

pinch
at some junctions.
to zoom in and out.
Main Menu.
23