Figure 3-4 Examining Initial Device Defaults In Meshmanager - Motorola MOTORMESH 4300 User Manual

Chapter 3: Device Configuration
Note that after initial Probing during the Add New Device process, the 802.11 b/g Radio and Mesh are
7
both ENABLED by default, and the 802.11 a Radio and Mesh are both DISABLED by default.
Figure 3-4
To configure an 802.11 b/g mesh network, a license key is not required. The only necessary steps are (1)
8
Probe device, (2) configure Device Name and Location, and (3) select the Add button to finalize the
configuration. DO NOT enter any License Key or Membership VLAN information.
July 2007
Examining Initial Device Defaults in MeshManager
3-4