Motomesh Duo 4300 Device Specifications - Motorola MOTORMESH 4300 User Manual

Nikon network hardware user manual
Table of Contents

Advertisement

Product Introduction

MOTOMESH Duo 4300 Device Specifications

The following specification tables apply to the MOTOMESH Duo 4300-49, 4300-58, and 4300-54
Infrastructure Devices.
Table 1-1
MOTOMESH Duo 4300-49 Device Specifications
Radio Characteristics
Primary Radio Operating Freq. (GHz)
Secondary Radio Operating Freq. (GHz)
Wi-Fi Support
RF Modulation
Transmit Power (Maximum)
Receive Sensitivity
Power Control
Antenna Type
Antenna Connector
Routing
Routing Engine
Routing Protocol
IEEE 802.11s Support
Network
Network Management Software
Network Interface
Network Segmentation
Quality of Service (QoS)
Security
Virtual LAN (VLAN)
Client Encryption Support
Internodal Encryption
Authentication
July 2007
2.400 to 2.483
4.940 to 4.990
802.11b/g at 2.4GHz; 802.11a at 4.9GHz
CCK (802.11b) / OFDM (802.11a/g)
2.4 GHz Portion
35 dBm EIRP
801.11b: -92 dBm (at 11 Mbps)
to -100 dBm (at 1 Mbps)
801.11g: -78 dBm (at 54 Mbps)
to -95 dBm (at 6 Mbps)
1dB increments
Two (2) omni directional, 8 dBi (for 2.4 GHz Radio) and 11 dBi (for 4.9
GHz Radio)
N-Type
MeshConnex™ Layer 2 routing with Layer 1 situational-awareness
Patented, hybrid proactive/reactive routing (low latency & fast route
convergence)
Upgradeable to IEEE 802.11s standard via OTA software updates
MeshManager Element Management System via secure SNMP v.3
10/100Mbps Ethernet (RJ-45) port with surge suppression
Multiple SSIDs with VLAN mapping
802.11e, EDCF, 802.11p and the IP precedence of DSCP (ToS) bits
Supports up to sixteen (16) per node, or 4094 per network
WEP, WPA (TKIP) and WPA2 (AES, 802.11i)
Intra-Mesh Security
802.1X (Infrastructure/Client) and MAC address hardware authentication
1-4
4.9 GHz Portion
34 dBm EIRP
802.11a: -77 dBm (at 27 Mbps) to -93
dBm (at 3 Mbps)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Motomesh duo 2.0 4300

Table of Contents