Shelf Runners; Water Container - Miele DG 6010 Operating And Installation Instructions

Cleaning and care

Shelf runners

 Pull the shelf runners off as shown.
 The shelf runners can be cleaned in
the dishwasher or by hand with a sol‐
ution of warm water and a little wash‐
ing-up liquid applied with a clean
sponge.
 Push the shelf runners firmly back in
after cleaning.
When putting them back in, make
sure they are correctly inserted (see
illustration).
If the shelf runners are not correctly
inserted, there is no anti-tip protec‐
tion. The temperature sensor could
also be damaged when cooking con‐
tainers are placed in the steam oven.
70

Water container

Do not immerse the water container
in water or clean it in a dishwasher.
For reasons of hygiene and to pre‐
vent the build-up of moisture in the
appliance, the water container
should be emptied after each use.
Do not use scouring pads or hard
brushes.
 Remove, empty and dry the water
container after each use.
 Release the insert by pushing the
catches on the sides in towards each
other and then pull it out of the con‐
tainer.
 After cleaning, dry both parts of the
insert thoroughly before refitting it in
the water container. When refitting
the insert, guide it in at an angle 
and then push it downwards  as il‐
lustrated.