RC Car
• Locate the battery compartment on the bottom of the RC car.
• Loosen the screw in the battery compartment cover using a Phillips screw-
driver and lift to remove. (The screw will remain in the cover.)
• Insert four "AA" (LR6) alkaline batteries as indicated inside the battery
compartment.
• Replace the battery compartment cover and tighten the screw using a
Phillips screwdriver. Do not over-tighten.
Battery Installation
1.5V x 6
"AA" (LR6)
This product requires
six "AA" (LR6) alkaline bat-
teries for operation; two in
the remote and four in the
RC car. For longer life, use
only alkaline batteries.
RC Car
Battery
Compartment
2