Wps - Aztech WL590E User Manual

WPS

WPS or Wi-Fi Protected Setup makes it easier for you to connect your WL590E
to your wireless router and the WL590E to your wireless devices with a simple
push of a button.
NOTE: The WPS feature is available on both the 2.4GHz and 5.0GHz band. To
use the WPS on one band, click on the corresponding band located on the
upper left corner of the WPS Page.
To connect the WL590E to a Wireless Router via WPS:
1. Press the WPS button of WL590E for five (5) seconds.
2. Press the WPS button on your router for two (2) seconds.
To connect the WL590E to a Wireless Device via WPS:
1. Press the WPS button of WL590E for two (2) seconds.
2. Press the WPS button on the Wireless Device for two (2) seconds.
NOTE: To accomplish a successful connection through WPS, simply
accomplish the process correctly within two minutes. It is also important to
ensure that the WPS feature of the device is enabled and must also be
supported on the wireless router and even the wireless devices that will be
connected to your WL590E.
User Manual
Page 31 of 40