Wireless Settings - D-Link DIR-330 User Manual

Secton 3 - Configuraton
Enable Wireless:
Check the box to enable the wireless function. If you do not want to
use wireless, uncheck the box to disable all the wireless functions.
Wireless Network
Service Set Identifier (SSID) is the name of your wireless
Name: network. Create a name using up to 32 characters. The SSID is
case-sensitive.
Wireless Channel: Indicates the channel setting for the DIR-330. The Channel can be
changed to fit the channel setting for an existing wireless network or
to customize the wireless network. If you enable Auto Channel Scan,
this option will be greyed out.
Enable Auto
The Auto Channel Scan setting can be selected to allow the
Channel Scan:
DIR-330 to choose the channel with the least amount of interference.
This feature is enabled by default.
802.11 Mode:
Select one of the following:
802.11b only - Select if all of your wireless clients are 802.11b.
802.11b/g mixed - Select if you are using both 802.11b and 802.11g wireless clients.
802.11g only - Select if all of your wireless clients are 802.11g.
Visibility Status:
Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the router. If Invisible is selected
the SSID will not be seen by site survey utilities so your wireless clients must have the SSID manually entered to connect to
the router.
Wireless Security:
Refer to page 50 for more information regarding wireless security.
D-Lnk DIR-330 User Manual

Wireless Settings