Edit A Route - Lowrance HDS Gen2 Touch Operator's Manual

New route window
34 |
Creating routes using existing waypoints
1.
Access the routes dialog
2.
Tap new
3.
Tap Create using route list
4.
Tap the new route window (shown below)
5.
Tap insert
6.
Tap the desired waypoint
7.
Repeat Steps 4, 5 and 6 until all points have been placed
8.
Tap Save

Edit a route

A route and a waypoint can only be edited from the chart page
when the item is selected.
1.
Tap the route
2.
Tap the route name on the menu
3.
Tap Edit
4.
Tap the screen to add routepoints
-
If you tap on a leg a new point will be added between
existing routepoints
-
To move existing routepoints, drag them to the desired
location
5.
Tap Save on the menu
Waypoints, Routes & Trails | Lowrance HDS Gen2 Touch