Denon AVR-1804 Operating Instructions Manual page 7

Connecting video components
• To connect the video signal, connect using a 75 Ω/ohms video signal cable cord. Using an improper cable can
result in a drop in video quality.
• When making connections, also refer to the operating instructions of the other components.
• The AVR-1804 is equipped with a function for up-converting video signals.
• The signal connected to the video signal terminal is output to the S-Video monitor out terminals.
• The REC OUT terminals have no conversion function, so when recording only connect the video terminals.
TV or DBS tuner
Connecting a TV/DBS tuner
AUDIO
VIDEO
B
OUT
R L OUT
TV/DBS
• Connect the TV's or DBS tuner's video output jack (VIDEO OUTPUT) to the
L
R
(yellow) TV/DBS IN jack using a 75 Ω/ohms video coaxial pin plug cord.
VIDEO
• Connect the TV's or DBS tuner's audio output jacks (AUDIO OUTPUT) to the
TV/DBS IN jacks using pin plug cords
AUDIO
AUDIO
VIDEO
B DVD player or video disc player (VDP), etc.
OUT
R L OUT
R L
Connecting a DVD player or a video disc player (VDP)
DVD
• Connect the video disc player's video output jack (VIDEO OUTPUT) to the
DVD/VDP IN jack using a 75 Ω/ohms video coaxial pin plug cord.
• Connect the video disc player's analog audio output jacks (ANALOG AUDIO OUTPUT) to the
AUDIO DVD/VDP IN jacks using pin plug cords.
• It is also possible to connect a video disc player, DVD player, video game, etc., to the VCR-2
jacks.
R L
L
R
L
R
R
L
R
L
R L
Video deck 2
R L R L
R L R L OUT IN
OUT IN
AUDIO VIDEO
Video deck 1
R L R L
R L R L OUT IN
OUT IN
VIDEO
AUDIO
Connecting a video decks
• There are two sets of video deck (VCR) jacks, so two video decks can be connected for simultaneous recording or video copying.
Video input/output connections:
• Connect the video deck's video output jack (VIDEO OUT) to the
jack (VIDEO IN) to the (yellow) VCR-1 OUT jack using 75
VIDEO
Ω/ohms video coaxial pin plug cords.
Connecting the audio output jacks
• Connect the video deck's audio output jacks (AUDIO OUT) to the
(AUDIO IN) to the VCR-1 OUT jacks using pin plug cords.
AUDIO
Connect the second video deck to the VCR-2 jacks in the same way.
.
(yellow)
VIDEO
Monitor TV
VIDEO
IN
Connecting a monitor TV
MONITOR OUT
• Connect the TV's video input jack (VIDEO
INPUT) to the MONITOR OUT jack
VIDEO
using a 75 Ω/ohms video coaxial pin plug
cord.
Note on connecting the digital input jacks
• Only audio signals are input to the digital input jacks.
For details, see pages 6, 14.
(yellow) VCR-1 IN jack, and the video deck's video input
VIDEO
VCR-1 IN jacks, and the video deck's audio input jacks
AUDIO
Connecting a video component equipped with S-Video jacks
• When making connections, also refer to the operating instructions of the other components.
• A note on the S input jacks
The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
• The AVR-1804 is equipped with a function for converting video signals.
• The signal connected to the S-Video signal terminal is output to the composite video monitor out terminals.
• The REC OUT terminals have no conversion function, so when recording only connect the S-Video terminals.
DVD player or video disc player (VDP)
S-VIDEO
B
OUT
Connecting a DVD player or a video disc player (VDP)
DVD
• Connect the DVD/VDP player's S-Video output jack
to the S-VIDEO DVD/VDP IN jack using an S-Video
connection cord.
• It is also possible to connect a video disc player,
DVD/VDP player, video camcorder, game machine,
etc., to the VCR-2 jacks.
Connect the components' audio inputs and outputs as described on page 7.
• When connecting the AVR-1804 with a monitor TV or DVD player
equipped with an SCART connector, use a converter cable (sold
separately) as shown in the diagram.
The AVR-1804 does not support input/output of RGB video signals.
Connecting a TV/DBS tuner
• Connect the TV's or DBS tuner's S video output jack (S-
VIDEO OUTPUT) to the TV/DBS IN jack using an
S-VIDEO
S jack connection cord.
S-VIDEO
B TV or satellite broadcast tuner
OUT
Monitor TV
S-VIDEO
IN
Connecting a monitor TV
MONITOR OUT
• Connect the TV's S video input (S-VIDEO INPUT) to the
S-VIDEO MONITOR OUT jack using a S jack connection
cord.
S-VIDEO
Video deck 2
IN OUT
Connecting the video decks
• Connect the video deck's S output jack (S-OUT) to the
VCR-1 IN jack and the video deck's S input jack (S-
S-VIDEO
IN) to the VCR-1 OUT jack using S jack connection
S-VIDEO
cords.
• Connect the video deck's S output jack (S-OUT) to the
S-VIDEO VCR-2 IN jack and the video deck's S input jack (S-
IN) to the S-VIDEO VCR-2 OUT jack using S jack connection
cords.
S-VIDEO
IN OUT Video deck 1
R
L
21-pin SCART terminal
ENGLISH
VIDEO
S-VIDEO
AUDIO
7