Denon AVR-1804 Operating Instructions Manual page 28

ENGLISH
DSP surround simulation
• To operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following
order each time the DSP SIMULATION button is
pressed:
MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME JAZZ CLUB
2
To enter the surround parameter setting mode,
press the SURROUND PARAMETER button.
• The surround parameter switches in the
following order each time the SURROUND
(Remote control unit)
PARAMETER button is pressed for the different
surround modes.
3
Select the various parameters.
(Remote control unit)
4
Adjust the parameter settings.
(Remote control unit)
5
Press the ENTER button to finish surround parameter mode.
(Remote control unit)
28
• Operating the surround mode and surround parameters from the main unit's panel.
1
Turn the SELECT knob to select the surround
mode.
1
• When turned clockwise
• When turned counterclockwise
3
2, 3
5
4 4
3
2
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH/6CH STEREO, ROCK ARENA, JAZZ CLUB,
VIDEO GAME, MONO MOVIE or MATRIX surround modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches
to a DTS signal, the mode automatically switches to DTS surround.
• When the "5CH/6CH STEREO" mode is selected, the display differs according to the Surround Back CH
ON/OFF.
Surround parameters e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: "small", "med.s" (medium-small), "medium", "med.l" (medium-large) and "large".
"small" recreates a small sound field, "large" a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
(Main unit)
DIRECT STEREO DOLBY PRO LOGIC II
DTS NEO:6
VIRTUAL SURROUND MATRIX VIDEO GAME
II
DIRECT STEREO DOLBY PRO LOGIC DTS NEO:6
VIRTUAL SURROUND MATRIX VIDEO GAME
To select the surround mode while adjusting the surround parameters, tone
defeat or tone control, press the SURROUND MODE button then operate the
selector.
(Main unit)
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you
want to set.
• The parameters which can be set differ for the different surround modes.
(Main unit)
(Refer to "Surround Modes and Parameters" on page 29.
Surround Back CH ON: 6CH STEREO
Surround Back CH OFF: 5CH STEREO
1 2 1, 3
MONO MOVIE
5CH/6CH STEREO
JAZZ CLUB ROCK ARENA
5CH/6CH STEREO MONO MOVIE
JAZZ CLUB ROCK ARENA