Stateless Autoconfiguration (Stateful) - D-Link DIR-615 User Manual

Section 3 - Configuration
My IPv6 Connection:
Select Stateless Autoconfiguration from the
drop-down menu.
IPv6 DNS Settings:
Enter the settings supplied by your Internet
provider (ISP).
LAN IPv6 Address:
Enter the LAN (local) IPv6 address for the
router.
LAN Link-Local
Displays the Router's LAN Link-Local Address.
Address:
Check to enable the Autoconfiguration feature.
Enable
Autoconfiguration:
Select Stateful. Refer to the previous page
for Stateful.
Autoconfiguration
Type:
Enter the start IPv6 Address for the DHCPv6
range for your local computers.
IPv6 Address
Lifetime:
Enter the end IPv6 Address for the DHCPv6
range for your local computers.
IPv6 Address Range
Start:
Enter the Router Advertisement Lifetime (in
minutes).
IPv6 Address
Lifetime:
D-Link DIR-615 User Manual

Stateless Autoconfiguration (Stateful)

60