Panasonic KX-TG8522AL Operating Instructions Manual page 51

Answering system
Problem
The unit does not
record new messages.
My own greeting
message cannot be
properly heard.
I cannot operate the
answering system.
I cannot operate the
answering system
remotely.
Cause/solution
L The answering system is turned off. Turn it on (page
36).
L The message memory is full. Erase unwanted
messages (page 38).
L The recording time is set to "Greeting Only".
Change the setting (page 41).
L If your own greeting message is not recorded properly,
callers are unable to leave a message. Record your
own greeting message again (page 37).
L If you subscribe to a voice mail service, messages are
recorded by your service provider/telephone company,
not your telephone. Change the unit's number of rings
setting or contact your service provider/telephone
company (page 40).
L Record your own greeting message again (page 37).
L Someone is using the unit. Wait for the other user to
finish.
L A caller is leaving a message. Wait for the caller to
finish.
L The handset is too far from the base unit. Move closer.
L The remote access code is not set. Set the remote
access code (page 39).
L You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 39).
L Press each key firmly.
L The answering system is turned off. Turn it on (page
40).
Useful Information
51