Caller List - Panasonic KX-TG8522AL Operating Instructions Manual

Caller ID Service
Category settings for
phonebook
Category settings can help you identify
who is calling by using different ringer
tones and display colours for different
categories of callers. When adding an
entry to the phonebook, you can assign
it to the desired category (page 18).
When a call is received from a caller
assigned to a category, the category's
display colour and ringer tone you
selected are used.
Changing category ringer tones
If you select "Default Ringer", the
unit uses the ringer tone you selected on
page 23 when calls from this category
are received. The default setting is
"Default Ringer".
1
n (left soft key) i 1
2
{V}/{^}: "Category" i M
3
{V}/{^}: Select the desired
category. i M
4
{V}/{^}: Select the current setting of
the category ringer tone. i M
5
{V}/{^}: Select the desired ringer
tone. i M
6
{ic}
Changing category display colours
If you select "Default Colour", the
unit uses the display colour you selected
on page 24 when calls from this category
are received. The default setting is
"Default Colour".
1
n (left soft key) i 1
2
{V}/{^}: "Category" i M
3
{V}/{^}: Select the desired
category. i M
4
{V}/{^}: Select the current setting of
the category colour. i M
5
{V}/{^}: Select the desired colour.
i M
34
6
{ic}

Caller list

Important:
L Only 1 person can access the caller
list at a time.
L Make sure the unit's date and time
setting is correct (page 13).
Viewing the caller list and
calling back
1
{<} (y)
2
Press {V} to search from the most
recent call, or press {^} to search
from the oldest call.
L You can see the detailed
information about the caller by
pressing A when in multiple
display mode.
3
To call back, press {C}.
To exit, press {ic}.
Note:
L If the entry has already been viewed
or answered, "Q" is displayed, even if
it was viewed or answered using
another handset.
L If the call matches an entry in the call
barred list, the number is logged with
7 (page 29).
L If you do not want to dial the area code
when making calls from the caller list,
you can store the area code which you
want the unit to delete automatically
(page 28).
Editing a caller's phone
number before calling back
1
{<} (y)
2
{V}/{^}: Select the desired entry.
i M