Panasonic KX-TG8522AL Operating Instructions Manual page 48

Useful Information
Programmable settings
Problem
The display is in a
language I cannot
read.
While programming,
the display returns to
standby mode.
I cannot activate the
eco mode.
I cannot register a
handset to a base unit.
Battery recharge
Problem
The handset beeps
and/or ) flashes.
I fully charged the
batteries, but
– ) still flashes or
– the operating time
seems to be shorter.
The handset display is
blank.
48
Cause/solution
L Change the display language (page 13).
L A call matching an entry in the call barred list is being
received. Wait and try again later.
L You cannot set eco mode when you set the repeater
mode "On". If required, set the repeater mode to
"Off" (page 32).
L The maximum number of base units (4) is already
registered to the handset. Cancel unused base unit
registrations from the handset (page 31).
L The maximum number of handsets (6) is already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 31).
L You entered the wrong PIN. If you forget your PIN,
contact an authorised service centre.
Cause/solution
L Battery charge is low. Fully charge the batteries (page
8).
L Clean the battery ends (S, T) and the charge
contacts with a dry cloth and charge again.
L It is time to replace the batteries (page 8).
L The handset is not turned on. Turn the power on (page
13).