Configure Power Settings; Power On Settings; Auto Power Off Settings; Configure Parental Controls - Insignia NS-24ER310NA17 User Manual

Configure power settings

Power settings let you set up your TV so that it turns on to the location you choose. Power settings also help your TV
save energy by automatically turning it off under certain conditions.

Power on settings

Power on settings tell your TV what to do when you turn on the power. To configure the power on settings, from the
Home screen menu, navigate to Settings > System > Power > Power on. Highlight the power on location from the list,
and then press OK to select it.

Auto power off settings

To help you save energy, your TV can automatically turn itself off after a period of inactivity or a period during which no
signal has been detected. It is factory-configured to do both of these things, but you can change these settings if
needed.
To configure automatic power off, from the Home screen menu navigate to Settings > System > Power > Auto power
off. In the Power settings screen, highlight the following options and press OK to turn them on or off:
• After 15 minutes of no signal—If no signal is detected on a TV input for 15 minutes, your TV automatically powers
off.
• After 4 hours of no interaction—If no remote control or panel button is pressed for 4 hours and your TV is not
displaying a TV signal or streaming a video, your TV is automatically powered off.

Configure parental controls

Parental controls enable you to control whether the members of your household can view certain kinds of broadcast TV
programs. When a program or feature is blocked, you can unblock it by entering a parental control PIN that only you
know.
Note
The parental control feature can be used to hide the Movie Store, TV Store, and
News options that are available on the Home screen menu of TVs manufactured for
the United States. However, the parental controls feature does not block other
streaming content nor content from inputs other than the TV tuner.

Creating a parental control PIN

The first time you access the Parental controls screen, you must create a new parental control PIN. Thereafter, whenever
you want to change parental control settings, unblock programming that has been blocked, change the PIN, or disable
parental controls, you must enter your parental control PIN.
Tip
Your parental control PIN has nothing to do with your Roku PIN. You can make them
the same if you want—this is entirely your choice.
To create a new parental control PIN, from the Home screen menu navigate to Settings > Parental controls. The screen
displays a numeric keypad. Use the arrow buttons and the OK button to enter a four digit code. Then repeat the process
to enter the same PIN again, just to make sure you correctly entered the PIN you want to use.
Important
If you forget your PIN, the only way to recover is to perform a factory reset operation,
as explained in
place just in case.
79
Factory reset everything on page 88. Be sure to write it down in a safe
www.insigniaproducts.com
24"/32" 720P, 48" 1080P, 60Hz, LED Roku TV