48"Model - Insignia NS-24ER310NA17 User Manual

48"model

Note
If your TV is the 24" or 32" model, go to
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and all connected devices are turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the
cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 On the Home screen, press
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
23
Cable or
satellite box
Cable
wall jack
or to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
www.insigniaproducts.com
24"/32" 720P, 48" 1080P, 60Hz, LED Roku TV
24" or 32" model on page 22.
HDMI cable
Side of TV