NS-24ER310NA17/NS-32DR310NA17/NS-48DR510NA17
Connecting a DVD or Blu-ray player
Many DVD or Blu-ray players have more than one connection type. To get the best video, you should use the best
connection type available. For more information, see
You can connect a DVD or Blu-ray player using:
• HDMI (best)
• AV (good)
HDMI (best)
24" or 32" model
Note
If your TV is the 48" model, go to
Note
Images do not necessarily represent the exact design of your television.
On your TV
HDMI cable
connector
HDMI jack
1 Make sure that your TV's power cord is unplugged and the DVD or Blu-ray player is turned off.
2 Connect an HDMI cable (not provided) to an HDMI jack on the side of your TV and to the HDMI OUT jack on the
DVD or Blu-ray player.
3 Plug your TV's power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.
4 On the Home screen, press
Note
An HDMI cable carries both audio and video. You do not need to use any
audio cables.
DVD or Blu-ray
player
HDMI cable
or
to highlight the HDMI 1, HDMI 2, or HDMI 3 tile, then press OK.
www.insigniaproducts.com
What connection should I use?
48" model
on page 31.
Back of TV
on page 21.
30