Pioneer PD-F1007 Service Manual page 50

PD-F1007
Removal of the Gear Holder Assy and the Disc Rack
1 Perform the steps 1 to 6 of "
Assy GM ".
2 Remove the screws A (2 screws), and then remove the Gear Holder
Assy.
3 Remove the Disc Rack.
Removal of the Hood and Hood
Base Assy
1 Perform the steps 1 to 6 of "
Servo Mechanism Assy GM ". and the steps 2 and
3 of "
Removal of the Gear Holder Assy and the
Disc Rack".
2 Remove the screws B (3 screws), and then remove
the Front Panel Assy.
3 Slide the Hood to the left side and remove it.
4 Remove the screws C (2 screws) and remove the
Hood Base Assy.
Disconnect the Hook
2
Screw B
Front Panel Assy
Disconnect
the Hooks
50
Removal of the Servo Mechanism
Removal of the
3
Hood
Screw B
Screw B
2
2
2
Hood Base Assy
Disconnect
the Hook
Screw C
(× 2)
4
Screw A (× 2)
Gear Holder Assy
3
Hood Base Assy
Disc Rack