Printing Or Copying Problems - Epson STYLUS CX3700 SERIES User Manual

Printing or Copying Problems

Only the green
■
Make sure the interface cable is connected securely at both ends and meets the
requirements listed in System Requirements.
■
Run a printer check; see Running a Printer Check. If the test page prints, make
sure your software is installed correctly.
The Epson Stylus CX sounds as though it is printing, but nothing prints.
■
Make sure the print head nozzles are not clogged. For instructions, see Cleaning
the Print Head.
■
The Epson Stylus CX won't operate properly if it's tilted or at an angle. Place it
on a flat, stable surface that extends beyond the base in all directions.
The Epson Stylus CX makes noise when you turn it on or after it has been sitting
for awhile.
The Epson Stylus CX is performing routine maintenance.
You don't see the
(taskbar) in Windows.
Try restarting your computer. If you still don't see the icon, follow these steps:
1. Click , point to
Start
2. Right-click your Epson Stylus CX and select
3. Click the
Maintenance
4. Click the
Speed and Progress
button.
5. Click the
Shortcut Icon
Printing is too slow.
Make sure your system meets the requirements listed in System Requirements. If
you're printing a high-resolution image, you need more than the minimum
requirements listed. You may also need to:
light is on, but nothing prints.
On
printer icon in the lower right corner of your screen
or
Settings Printers and Faxes
tab.
button, then click the
box. Then click
, then select
Printing Preferences
Monitoring Preferences
to close the open windows.
OK
.
Printers
.
78