Epson STYLUS CX3700 SERIES User Manual page 61

2. Right-click the
screen). Select
You see a screen like the following:
3. Click
Start
Cleaning takes several seconds. The Epson Stylus CX runs a head cleaning cycle
and the
Caution: Never turn off the Epson Stylus CX while head cleaning is in progress.
You may damage it.
4. When the
Stylus CX. Click
The nozzle check pattern prints (see Examining the Nozzle Check Pattern for
details).
5. If there are no gaps or lines, click
If there are still gaps or lines, or the test patterns are faint, click
print head again.
If you don't see any improvement after cleaning four or five times, refer to
Problems and Solutions. You can also turn the printer off and wait overnight.
This lets any dried ink soften. Then try cleaning the print head again.
Tip: If you do not use your Epson Stylus CX often, it is a good idea to print a few
pages at least once a month to maintain good print quality.
61
printer icon on your taskbar (in the lower right corner of your
Head Cleaning
or .
Next
light flashes.
On
light stops flashing, make sure paper is loaded in the Epson
On
Print Nozzle Check Pattern
.
, then click
.
Finish
.
Print
to clean the
Clean