Stihl MS 280 C Instruction Manual page 33

English / USA
: Disengage the chain brake: Pull
hand guard (9) towards the front
handle.
: Turn the guide bar so that the
tensioning gear is facing you.
32
9
10
: Fit the chain over the sprocket (10).
The long collar screw (11) in the
center engages the hole in the
tensioning gear. The heads of the
two short collar screws locate in the
guide bar slot.
11
: Press down the throttle trigger
interlock lever to disengage the
chain brake.
: Make sure the drive link tangs
engage the bar groove (see arrow)
and then rotate tensioning gear
counterclockwise as far as stop.
MS 280 C