Port Statistics using ACLI
This section contains information about how you can display the statistics for a port for both
received and transmitted traffic.
Displaying Port-Statistics using ACLI
Display port statistics.
Procedure
1. Log on to ACLI in Interface Configuration command mode.
2. At the command prompt, enter the following command:
Example
The following figure provides a sample of show port-statistics command.
3524GT-PWR+#show port-statistics port 1
Received
Packets:
Multicasts:
Broadcasts:
Total Octets:
FCS Errors:
Undersized Packets:
Oversized Packets:
Filtered Packets:
Frame Errors:
Pause Frames:
Transmitted:
Packets:
Multicasts:
Broadcasts:
Total Octets:
Collisions:
Single Collisions:
Multiple Collisions:
Excessive Collisions:
Deferred Packets:
Late Collisions:
Pause Frames:
Packets
Configuration — System Monitoring
show port-statistics [port <portlist>]
64 bytes:
65-127 bytes:
128-255 bytes:
256-511 bytes:
512-1023 bytes:
1024-1518 bytes: 0
Jumbo:
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Port Statistics using ACLI
March 2013
37