Important Instructions - New Buck Corporation 261 Manual

INSTALLATION, OPERATION, AND
MAINTENANCE INSTRUCTIONS
THESE UNITS GENERATE A LOT OF HEAT, SO TREAT THEM WITH CARE. HOT
WHILE IN OPERATION! KEEP CHILDREN, CLOTHING AND FURNITURE AWAY.
CONTACT MAY CAUSE SKIN BURNS.
INSTALLING AND USING THE APPLIANCE.
TIONS MAY RESULT IN PROPERTY DAMAGE, BODILY INJURY, OR EVEN DEATH.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCES.
The New Buck Corp. non-catalytic MODEL 261 has been tested by ITS, Warnock
•
Hersey to ANSI/UL Standards 1482.
Install and operate your units according to instructions provided in this manual. Local
•
building codes may apply; therefore, contact your local building inspector or fire marshal
for necessary installation requirements and permits which may go beyond these
instructions.
If appliance is installed in mobile homes: "DO NOT INSTALL IN SLEEPING
•
ROOMS."
Examine the masonry fireplace and chimney prior to installation of the fireplace accessory
•
to determine that the construction meets the minimum fireplace construction requirements
illustrated in the instructions, that it is free from cracks, loose mortar, creosote deposits
and other blockage, or other signs of deterioration.
"DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER
APPLIANCE." DO NOT USE A FLUE INTENDED FOR A GAS APPLIANCE."DO
NOT CONNECT TO ANY DISTRIBUTION DUCT OR SYSTEM."
MODELS 261
READ THIS FIRST

IMPORTANT INSTRUCTIONS

WARNING
CAUTION
2
READ ALL INSTRUCTIONS BEFORE
FAILURE TO FOLLOW INSTRUC -