Table of Contents
Advertisement
Note: The system is only active at speeds
above 3 mph (5 km/h).
The system has a power-up movement check
feature. When your start your vehicle, the
lamps track left to right, then back to center
to alert the driver that the system is working
properly.
DIRECTION INDICATORS
E163272
MKS (CLE) Canada/United States of America, enUSA, First Printing
Lighting
•
To operate the left-hand direction
indicator, push the lever down until it
stops.
•
To operate the right-hand direction
indicator, push the lever up until it stops.
•
To manually cancel direction indicator
operation, push the lever again in either
direction.
Lane Change
To indicate a left or right lane change:
•
Push the lever up or down to the first stop
position and release. The direction
indicator will flash three times and stop.
•
Push the lever up or down to the first stop
position and hold. The direction indicator
will flash for as long as you hold the lever
in this position.
INTERIOR LAMPS
The lamps will switch on when you have met
one of the following conditions:
•
You open any door.
•
You press a remote control button.
•
You press the outer edge of the clear lens
on the front row map lamp.
76
Front Row Map Lamps
E166237
To switch on the map lamps, press the outer
edge of the clear lens.
The front row map lamp will automatically
turn on when:
•
Any door is opened.
•
You press and hold the top of the
instrument lighting dimmer switch past
the first detent.
•
You press any of the remote entry
controls and the ignition is in the off
position.
Advertisement
Table of Contents
