Lincoln MKS 2016 Owner's Manual page 254

Note: For vehicles with the EcoBoost engine,
move the air filter assembly aside to access
the transmission dipstick. See Moving the Air
Filter Assembly for more information.
5. Remove the dipstick and wipe it clean
with a dry, lint free clean rag. If necessary,
refer to the Under hood overview in this
chapter for the location of the dipstick.
6. Install the dipstick making sure you fully
seat it in the filler tube by turning it to the
locked position.
7. Remove the dipstick and inspect the fluid
level. The fluid should be in the
designated areas for normal operating
temperature.
Moving the Air Filter Assembly
(Accessing the Dipstick)
WARNING
Do not run engine with the air filter
disconnected.
1. Switch the engine off.
MKS (CLE) Canada/United States of America, enUSA, First Printing
Maintenance
E173335
2. Clean the area around the clamp that
connects the air filter assembly to the
rubber hose and then loosen it.
3. Remove the bolt cover.
251
2
3
6 5
E173334
4. Remove two bolts that attach the air filter
assembly to the front of the vehicle.
5. Remove the harness retaining clip by
pulling up.
4