Heatilator CNXT4236IT-C Owner's Manual page 17

6. Remove screws from log tabs on both ends of the rear
log and remove the log. See Figure 3.7.
Figure 3.7 Remove Screws from Log Tabs
7. Remove the two screws from the back corners of the
burner assembly. See Figure 3.8.
Figure 3.8 Remove Screws from Burner Assembly Rear Corners
8. Remove burner skirt by removing 4 screws. See Figure
3.9.
Figure 3.9 Remove Burner Skirt
Heatilator • CNXT4236IT-C, CNXT4842IT-C, CNXT4236IH-C, CNXT4842IH-C • 2208-900 Rev. G • 10/10
9. Bend down grate tab at the right of burner assembly.
Assembly will slide out to the right. See Figure 3.10.
Figure 3.10 Grate Tab
Figure 3.11 Valve Assembly Removal
17