Saeco New Royal HD 8930 Service Manual page 16

NEW ROYAL
MACHINE MENU Used to customize the machine's operational settings
To change the appliance operating settings
GENERAL MENU
SOUND
OFF
ON
ECOMODE
OFF
ON
GENERAL STANDBY
15 MINUTES
30 MINUTES
60 MINUTES
180 MINUTES
CUP HEATER
OFF
ON
DISPLAY MENU
This function is used to set the menu language and the display brightness
DISPLAY MENU
LANGUAGE
ENGLISH
BRIGHTNESS
CONTRAST
WATER MENU
This menu is used to set the parameters for correct water management
WATER MENU
HARDNESS
ENABL. FILTER
ACTIV. FILTER
Saeco International Group
Services Unlimited, Inc./ Parts Guru
This function permits activating/deactivating audible warnings
To disable buzzers
To enable buzzers
This function governs activation of the boilers in the appliance for energy saving
When the machine is switched on all the boilers (coffee/steam) come on to allow the immediate
preparation of all beverages.
When the appliance is switched on, only the coffee boiler is activated. The appliance consumes less
power but takes longer to dispense milk beverages
This function is used to set the time since the last beverage dispensing when the machine will go onto
standby. The default time setting is 30 min.
After the set time the machine will go onto standby.
To reactivate the machine, press any button.
After running function diagnosis and the heating phase, the machine is again ready for use
This function is used to enable/disable the cup heater on the top of the machine
To disable the cup heater
To enable the cup heater
This setting is vital for correctly setting the parameters of the appliance for the user's country
The currently selected language is shown. The language can be changed using the special com-
mands
To set the correct brightness on the display
To set the correct contrast on the display
To change the setting of the hardness of the water in the appliance, adjusting it to the one used, so it
will request descaling at the right time
To activate/deactivate the water fi lter replacement warning. When this function is active the appliance
warns the user when the water fi lter needs to be changed.
OFF: Warning disabled ON: Warning enabled
(this value is set automatically when the fi lter is activated)
To activate the fi lter after it has been installed or replaced.
Rev. 01
03 USER INSTRUCTIONS
Page 02 / 04