Printing-Related Troubleshooting - MUTOH ValueJet VJ-1624 Quick Reference

5 Troubleshooting
5.3.4

Printing-related troubleshooting

(1) Printing is partially stained or incomplete
NOTE NOTE
• Proper print quality may not be obtained with the media other than the recommended one.
No. Possible cause
1 Does the media include moisture?
2 Are you using the folded or wrinkled media?
3 Does the media bend?
(2) The printing position is incorrect (some parts of the media cannot be printed
on)
No. Possible cause
1 Is the loading position of the media correct?
2 Did you set up the origin and print position?
(3) Printing is blurred
No. Possible cause
1 Are you using the recommended media?
2 Are you using the thick or thin media?
3 Is the media printed on the printing surface?
4 Did you perform Alignment?
5 Did you perform Media feed compensation?
Remedy
Replace it with new media.
Use the recommended media.
When using media other than the dedicated
one, set the Vacuum Fan menu.
Remedy
Set the media correctly.
Cancel or reset the settings of the origin and
print position.
Remedy
Use the recommended media.
Use the recommended media.
Confirm the printing surface of the media and
set it correctly.
Perform Alignment.
Perform Media feed compensation.
5-36
VJ-1624 QUICK REFERENCE
Reference
""6.1.2
Replacing roll media"
in the Operation
Manual
"4.2.1 Media
type" in the Operation
Manual
"5 Panel setup
menu" in the
Operation Manual
Reference
3.5.2 Setting
Roll Media
"5 Panel setup
menu" in the
Operation Manual
Reference
"4.2.1 Media
type" in the Operation
Manual
"4.2.1 Media
type" in the Operation
Manual
3.5 Loading
media
5.1.2 Adjust the
print head
"4.2.6 Media
feed compensation"
in the Operation
Manual