Printing-Related Troubleshooting - MUTOH Valuevet VJ-2638X Operation Manual

Troubleshooting
7.1.4

Printing-related troubleshooting

(1) Printing is partially stained or incomplete
NOTE
Proper print quality may not be obtained with the media other than the recommended one.
No. Possible cause
1 Does the media include moisture?
2 Are you using the creased or wrinkled media?
3 Does the media bend?
(2) The printing position is incorrect (some parts of the media cannot be printed on)
No. Possible cause
1 Is the loading position of the media correct?
2 Did you set up the origin and print position?
(3) Printing is blurred
No. Possible cause
1 Are you using the recommended media?
2 Are you using the thick or thin media?
3 Is the media printed on the printing surface?
4 Did you perform Micro adjust print?
5 Did you perform Media feed compensation?
6 Is the temperature setting of each heater
appropriate?
(VJ-2638X/1938X/1638X)
354
VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL
Replace it with the new media.
Use the recommended media.
When using media other than the
recommended one, set the Vacuum Fan menu.
Load the media correctly.
Cancel or reset the settings of the origin and
print position.
Use the recommended media.
Use the recommended media.
Confirm the printing surface of the media and
set it correctly.
Perform Adjust print.
Perform Media feed compensation.
Set the temperature appropriately.
Remedy
Remedy
Remedy
Malfunctions and failures
Reference
6.1.2
Replacing Roll
Media
4.2.1 Media
type
5.1.1.1.7
Vacuum Fan menu
Reference
3.4.2 Loading
Roll Media into the
printer
5.1.8 Origin
menu
Reference
4.2.1 Media
type
4.2.1 Media
type
3.4 Loading
media
3.6 Print
quality adjustment
4.2.6 Media
feed
compensation
5.1.1.1.4 Pre-
heater menu (VJ-
2638X/1938X/
1638X) 5.1.1.1.6
to
Dryer menu (VJ-
2638X/1938X/
1638X)