Technical Specifications,Connections,And Chassis Overview - Philips 26TA2800/93 Service Manual

2
TPS1.1A LA

1.Technical Specifications,Connections,and Chassis Overview

Index of this chapter:
http://jdwxzlw.5d6d.com/?fromuser=森林
1.1 Technical Specifications
1.2 Connections
1.3 Chassis Overview
Notes:
Figures below can deviate slightly from the actual situation,
due to the different set executions.
Specifications are indicative (subject to change)
1.1 Technical Specifications
1.1.1 Technical Specifications
Type : LCD
Outline dimensions
: 760.0 mm(H) x 450.0 mm(V) x 47.4(D)
Pitch (mm) : 421.5.um(H) x 140.5um(V) (26")
: 510.75 .um(H) x 170.25um(V)(32")
Pixel format : 1366 horiz. by 768 vert. pixels
Color pixel arrangement : RGB vertical stripe
Display surface : Hard coating(3H),Anti-glare treatment
Number of color : 16,777,216 colors ( 8 bits)
Backlight : 17 EEFL(26")
: 16 CCFL(32")
Active area (WxH) : 575.769mm x 323.712mm (26")
: 697.68mm X 392.26 mm(32")
View angle : Viewing angle free(R/L 178(Typ.),U/D
: Viewing angle free(R/L 176(Typ.),U/D
Contrast ratio : Typical 700 : 1(26")
Luminance of white : 500 cd/m²(Center 1 points, Typ.)
Supported video formats:
1.1.2 Sound
Sound system : 2CS, NICAM B/G (5.5-5.85), NICAM D/K (6.5-5.85),
NICAM I (6.0-6.52), stereo for all (should be in line
with RF system of each region)
Maximum power:2X5
1.1.3 Miscellaneous
Power supply
AC-input : 90V ~ 264VAC,50/60±2Hz
Power consumption :
Normal:
1.PC Mode TYP 100 W[Smart picture as "Normal" ] (with audio)(26")
PC Mode TYP 145 W[Smart picture as "Normal" ] (with audio)(32")
2.TV Mode TYP 100 W [Smart picture as "Rich"] (with audio)(26")
TV Mode TYP 145 W [Smart picture as "Rich"] (with audio)(32")
Maximum: 130W (with audio)(26")
170W (with audio)(32")
Power cord length : 1.8M
Power cord type : 3 lead with earth plug , plugable
(US type)
Power indicator : LED (On: blue ,Sleeping mode: Amber )
Auto power saving : EPA, Nutek, VESA DPMS
Horizontal scan : 30 ~ 61KHz
Vertical scan : 56 ~ 75 Hz
1. Technical Specifications,Connections,and Chassis Overview
: 626.0 mm(H) x 373.0 mm(V) x 44.1(D)
mm (Typ.)(26")
mm (Typ.)(32")
of the front polarizer
178(Typ.) (26")
176(Typ.))(32")
Typical 1500 : 1(32")
720 X 480i 60Hz
720 X 576i 50Hz
720 X 480P 60Hz
家电维修资料网
720 X 576P 50Hz
1280X 720P 50Hz
1280X 720P 60Hz
1920X1080i 50Hz
1920X1080i 60Hz
1920X1080p 50Hz
1920X1080p 60Hz
免费下载各种维修资料
Ambient conditions:
Ambient temperature: 15°C ~35 °C
Relative humidity : 25% ~ 75%.
1.2 Connections
1.2.1 Signal Connector
Connectors: From Right to Left
1.Tuner: PAL D/K for 93 model
PAL B/G I and SECAM B/G D/K for 98 model
PAL D/K I and NTSC-M for 79 model
2.Compair Rx/Tx communicate
3.AV1 audio IN : AV1 and S-Video shared audio R/L(RCA jack)
4.AV1 IN : Composite video input (AV1)
5.CVI IN : Component input with YPbPr format with audio R/L.
6.PC audio IN: audio R/L(mini-jack).
7.PC IN: VGA input (D-SUB connectors)
8.DVI-D : digital PC and video input
9.Earphone : earphone jack
10.AV2 IN : Composite video input (AV2 side)
11.AV2 audio IN : AV2 and S-Video side audio R/L(RCA jack)
12.S-Video IN : S-video input (S-Video side)
12
1.2.2 Input Signal
1.2.2.1 signal type
PC Signal
Analog Video :15 pin D-Sub
0.7 Vp-p linear, positive polarity and
separate Sync ( TTL level, positive or
negative polarity )
Digital Video :24-pin DVI-D connect connector, Single
TMDS link according to DVI specification
Audio signal :Mini-jack audio input
TV Signal
RF signal : Aerial or cable via RF connector,
RF input level -10mV (80dBuV) typical, terminated with
input impedance of 75W.
Transient response: < 250 nS.
Sound (5.5MHz) suppression: > 55dB.
Chroma (4.43MHz) suppression: > 25dB.
Y/C separation: > 20dB.
Support:
China/93 PAL D/K
AP/98 PAL B/G I SECAM B/G D/K
AP/79
Component Y Pb Pr with RCA connector ( Video , Audio input ) Specification
Support: 480i/p, 720p/60Hz, 1080i/60Hz
9
10
11
PAL B/G I NTSC-M
Y : 700mV, Pb, Pr, : ± 350mV,
Video
Impedance : 75W
Audio : L/R input
Nominal : 0.5 V rms.
Maximum : 1.5 V rms. Impedance > 10 kW
Note : the input will be overloaded
when the signal > 1.5 V rms.