Philips 26TA2800/93 Service Manual page 12

12
TPS1.1A LA
5.2 Factory Mode
It can enter Factory Mode
http://jdwxzlw.5d6d.com/?fromuser=森林
1. Press" Menu in normal operation mode to enter OSD.
" "
2. Press "062596+Menu on the button (RC) remote control in OSD.
" "
3. The screen will appear F3 content in the bottom, choose it and press the right key.
OSD behavior:
Before press number key change OSD item
Now remove previous function, press number key then press OK will change value
Item
//Action Items
0 Exit Factory
1 AutoColor
//Switch Items
2 Power On
3 AGING MODE
//ADC Gain & Offset
4 ADC_GAIN_R
5 ADC_GAIN_G
6 ADC_GAIN_B
7 ADC_OFFSET_R
8 ADC_OFFSET_G
9 ADC_OFFSET_B
//Color Temperature
10 CLR_TEMP_R
11 CLR_TEMP_G
12 CLR_TEMP_B
//Tuner & Panel Id
13 EEPROM ID
The below pictures is for your reference:
Step1: press MENU+062596 in user mode.
Step2: choose F3 98 V1.77.74.3,press the right key, then
enter the factory mode.
5. Service Modes, Error Codes and Fault Finding
Description
PC: any pattern has black and white
YPbPr:SMPTEbar(color bar), any timing.
turn<On> and no signal input
(values different by VGA and YPbPr)
AutoColor changes those items
(values different by AV,VGA,DTV,YPbPr)
Back-End Scaler R G B Gain
家电维修资料网
value different by type
免费下载各种维修资料
Range method of operation
press OK.
press OK. when autocolor, the OSD disappear, when
finished. OSD appear.
On/Off
On/Off
0~255 Press Left and Right to change value
0~255
0~255
0~127
0~127
0~127
0~255 Press Left and Right to change value
0~255
0~255
The factory content: