Philips 26TA2800/93 Service Manual page 10

10
TPS1.1A LA
Step 6. Remove frame-PCB.
Remove 7 screws as Fig.8.
http://jdwxzlw.5d6d.com/?fromuser=森林
Step 7. Remove Metal frame.
Remove 16 screws as Fig.9.
Step 8. Remove Metal frame.
Remove 4 screws as Fig.10.
4. Mechanical Instructions
Fig.8
4.2 Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
a. While re-assembling, make sure that all cables are placed
b. Pay special attention not to damage the EMC foams at the
SSB shielding. Check that EMC foams are put correctly on
Fig.9 Fig.9 their places.
In warranty, it is not allowed to disassembly the LCD panel, even the
backlight unit defect.
家电维修资料网
Out of warranty, the replacment of backlight unit is a correct way
when the defect is cused by backlight (CCFL,Lamp).
Fig.10
Fig.11
免费下载各种维修资料
Service Position
and connected in their original position.
Fig.12