Philips 26TA2800/93 Service Manual page 3

1. Technical Specifications,Connections,and Chassis Overview
S-Video with S terminal (Video, Audio input) Specification
Video - Y : 1Vpp , C : 300 mV pp
-Impedance : 75W. http://jdwxzlw.5d6d.com/?fromuser=森林
Audio L/R input (share with Composite Audio input)
Nominal : 0.5 V rms.
Maximum : 1.5 V rms. Impedance > 10 kW.
Note : the input will be overloaded when the signal > 1.5 V rms.
Support : PAL, NTSC and SECAM colour system
Composite with S terminal (Video, Audio input) Specification
Video - : 700mV Video, 300 mV -Sync
Impedance : 75W.
Audio L/R input (share with Composite Audio input)
- Nominal : 0.5 V rms.
Maximum : 1.5 V rms, Impedance > 10 kW.
Note : the input will be overloaded when the signal > 1.5 V rms.
Support : PAL, NTSC and SECAM colour system
DVI input with DVI connector, support HDCP Specification
Video - Digital interface with 4 channels TMDS signal
Impedance : 100W.
Audio L/R input
- Nominal : 0.5 V rms.
Maximum : 1.5 V rms.-Impedance > 10 K
Support : 480i/p, 720p/60Hz, 1080i/60Hz
D-sub Pin assignment
PIN
SINGNAL
No.
1 Red video input
2 Green video input /SOG
3 Blue video input
4 GND
5 GND– cable detect
6 Red video ground
7 Green video ground
8 Blue video ground
PIN 家电维修资料网
SINGNAL
No.
9 DDC +5V
10 Logic ground
11 GND
12 Serial data line (SDA)
13 H. Sync / H+V
14 V. Sync
15 Data clock line (SCL)
免费下载各种维修资料
DVI Pin assignment
PIN
SINGAL
No.
1 T.M.D.S. Data2-
2 T.M.D.S. Data2+
3 T.M.D.S. Data2/4 Shield
4 No connect
5 No connect
6 DDC Clock
7 DDC Data
8 No connect
9 T.M.D.S. Data1-
10 T.M.D.S. Data1+
11 T.M.D.S. Data1/3 Shield
12 No connect
1.3 Chassis Overview
P
Power board
Key board
IR board
IR
TPS1.1A LA
PIN
SINGAL
No.
13 No connect
14 +5V Power
15 Ground (for +5V)
16 Hot Plug Detect
17 T.M.D.S. Data0-
18 T.M.D.S. Data0+
19 T.M.D.S. Data0/5 Shield
20 No connect
21 No connect
22 T.M.D.S. Clock Shield
23 T.M.D.S. Clock+
24 T.M.D.S. Clock-
K
SideAV board
Scaler board
AV
S AV
3