Table of Contents
Advertisement
• NAT: Select "Enabled".
Optional Setting
• IP Address: Type your ISP assigned IP address in the IP Address text box.
• Subnet Mask: Enter a subnet mask in dotted decimal notation.
• Default Gateway: You must specify a gateway IP address (supplied by your ISP)
DNS
• Obtain DNS automatically: Select this check box to use DNS.
Primary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
•
passed to the DHCP clients along with the IP address and the subnet mask.
• Secondary DNS: Enter the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet mask.
PPP
• Username: Enter the username provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive). This is usually in the format of
"username@ispname" instead of simply "username".
• Password: Enter the password provided by your ISP. You can input up to 128
alphanumeric characters (case sensitive).
Press Apply and then click on Save Config.
WEBSHARE 243WM
25
Advertisement
Table of Contents
