Dhcp Server - Atlantis Land A02-RA243-W54M User Manual

• WEP Encryption: To prevent unauthorized wireless stations from accessing data
transmitted over the network, the router offers highly secure data encryption, known
as WEP. If you require high security for transmissions, there are two alternatives to
select from: WEP 64 and WEP 128. WEP 128 will offer increased security over WEP
64.
• Passphrase: This is used to generate WEP keys automatically based upon the input
string and a pre-defined algorithm in WEP64 or WEP128. You can input the same
string in both the AP and Client card settings to generate the same WEP keys. Please
note that you do not have to enter Key (1-4) as below when the Passphrase is
enabled..
• Key (1-4): Enter the key to encrypt wireless data. To allow encrypted data
transmission, the WEP Encryption Key values on all wireless stations must be the
same as the router. There are four keys for your selection. The input format is in HEX
style, 5 and 13 HEX codes are required for WEP64 and WEP128 respectively, the
separator is "-". For example, using WEP64, 11-22-33-44-55 is a valid key, whilst
1122334455 is invalid.
• Hide ESSID: User can select Enable or Disable to hide ESSID.

3.6.3.1.4 DHCP Server

You can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable
the router's DHCP relay functions. The DHCP protocol allows your router to dynamically
assign IP addresses to PCs on your network if they are configured to obtain IP addresses
automatically.
WEBSHARE 243WM
30